en

PC Upgrade and PSU Planner

Check socket, RAM generation, BIOS, dimensions, power connectors and PSU budget with your datasheet values. Unknowns stay unconfirmed - local, no upload.

This calculator gives a non-binding, model-based estimate and is not financial, tax or legal advice. More in the disclaimer
  • Bangladesh
  • Brazil
  • Bulgaria
  • China
  • Egypt
  • Euro area
  • France
  • Germany
  • India
  • Indonesia
  • Italy
  • Japan
  • Kenya
  • Malaysia
  • Mexico
  • Netherlands
  • Nigeria
  • Pakistan
  • Poland
  • Portugal
  • Russia
  • South Korea
  • Spain
  • Sweden
  • Taiwan
  • Thailand
  • Türkiye
  • Ukraine
  • United Kingdom
  • United States
  • Vietnam
CPU socket (per datasheet)
Motherboard socket (per datasheet)
RAM generations supported by the CPU
  • Unknown
  • DDR3
  • DDR4
  • DDR5
  • DDR4 and DDR5
Motherboard RAM generation
  • Unknown
  • DDR3
  • DDR4
  • DDR5
RAM generation of the modules
  • Unknown
  • DDR3
  • DDR4
  • DDR5
Number of RAM modules
Motherboard RAM slots
BIOS support per CPU support list
  • Not checked
  • Supported with the installed BIOS version
  • Supported only after a BIOS update
  • Not supported
Graphics card length
  • mm
  • in
Maximum graphics card length in the case
  • mm
  • in
CPU cooler height
  • mm
  • in
Maximum cooler height in the case
  • mm
  • in
Graphics card: PCIe 8-pin connectors needed
Graphics card: PCIe 6-pin connectors needed
Graphics card: 12V-2x6/12VHPWR connectors needed
PSU: PCIe 6+2-pin connectors
PSU: plain PCIe 6-pin connectors
PSU: 12V-2x6/12VHPWR connectors
Motherboard: EPS 12V connectors needed (8-pin)
PSU: EPS 12V connectors (8-pin or 4+4)
CPU power draw under load
Graphics card power draw (board power)
Other parts (motherboard, drives, fans)
Reserve (assumption, adjustable)
PSU rated power
Graphics card peak power per manufacturer (optional)

Result

No conflict found, but points unconfirmed
Overall result
0
Conflicts
10
Unconfirmed points
Unconfirmed: value missing
CPU socket
Unconfirmed: value missing
RAM generation
Unconfirmed: value missing
RAM slots
Unconfirmed: support list not checked
BIOS support
Unconfirmed: value missing
Room for the graphics card
-
Graphics card margin (case minus card)
Unconfirmed: value missing
Room for the CPU cooler
-
Cooler margin (case minus cooler)
Unconfirmed: value missing
Graphics card power connectors
8-pin ? / ? · 6-pin ? / ? · 12V-2x6 ? / ?
Connectors needed / available
Unconfirmed: value missing
Motherboard EPS 12V connectors
Unconfirmed: value missing
Power budget
-
Sustained load
-
Required with reserve
-
Headroom to rated power
-
Calculation
Unconfirmed: spikes unknown, no approval guarantee
Power spikes
-
Load with graphics card peak
Is my file uploaded?

No. Everything runs in your browser - your file never leaves your device. How this is verifiable

No upload100% local
Your content stays with youno third-party access
Hosted in GermanyGlobal Content Delivery
Independently auditedTLS A+ · HTTP headers A+

Before an upgrade there are three questions: do the parts fit together, do they fit in the case, and is the power supply enough? The planner checks each question on its own with the values you enter from datasheets and support lists. CPU and motherboard sockets are compared, the RAM generation of CPU, motherboard and modules must match, and the number of modules must not exceed the slots. An example: CPU socket AM5 and motherboard LGA1700 immediately give the conflict "sockets differ", even while every other field is still empty.

Dimensions and connectors are reported separately. The graphics card length is compared with the case limit and the cooler height with the cooler clearance, each with the margin in millimetres and inches; one inch is exactly 25.4 mm, and every field keeps its own unit. For power connectors the planner counts what the card needs and what the PSU provides: a 6+2-pin connector serves as 8-pin or 6-pin, a 12V-2x6 socket can only be fed by a matching PSU cable. The planner never assumes adapters.

The power budget is a traceable calculation: CPU plus graphics card plus other parts gives the sustained load, times (1 + reserve) the requirement. With 220 W, 320 W, 60 W and a 20 % reserve that is 600 W sustained load and 720 W required; a 750 W power supply then has 30 W of headroom. Short graphics card power spikes stay unconfirmed without a manufacturer figure, and even with one the result is a calculation, not an approval: how a power supply reacts to spikes is not in any form.

Free, no account - calculate as often as you like; your inputs stay on your device.

Specifications

Specifications
Input formatsForm inputs (no file)
ProcessingLocally in your browser (JavaScript)
File uploadNone

In 3 steps

  1. Enter sockets, RAM generations, module count, slots and the BIOS status from the motherboard CPU support list.
  2. Enter graphics card length and cooler height with the case limits, in mm or inches per field.
  3. Count the power connectors needed and provided by graphics card, motherboard and PSU.
  4. Enter power draws, reserve and rated power, then read the overall result, conflicts and unconfirmed points.

Limitations: The planner only checks your entries for contradictions; it knows no products, and a result without conflicts is no guarantee of compatibility, stability or safety. It does not replace an electrical safety check and gives no instructions for working on mains voltage. Power spikes, protection circuits, cable quality, memory qualification lists (QVL), form factors such as SO-DIMM and regional product variants are not checked.

FAQ

Where do I get the values?

From the manufacturers' datasheets and the CPU support list of your motherboard. The planner deliberately contains no product database: every value comes from you, so nothing outdated or wrong appears as a fact. Leave what you do not know empty; that point then stays unconfirmed.

Why is the result "unconfirmed" although there is no conflict?

Because at least one point is missing, ambiguous or not checked, for example the BIOS status or the graphics card peak power. A missing value never counts as a fit. The number of unconfirmed points is shown right next to the result.

How much reserve should the power supply have?

The reserve is an assumption you set yourself; 20 % is prefilled. The planner shows sustained load, requirement with reserve and the headroom to the rated power separately. If the rated power is above the sustained load but below the requirement, the result is "tight".

May I replace missing connectors with an adapter?

The planner never counts adapters and recommends none. A missing connector is a conflict. Whether an adapter is permitted is up to the PSU and graphics card manufacturers; when in doubt, a power supply with the matching cables is the safe choice.

PC Upgrade and PSU Planner: free and without an account?

Yes. Using it is free and needs no account: you can calculate as often as you like, and your inputs stay on your device.

Related tools

Energy Cost Calculator · LLM VRAM Calculator · Data Size Converter · GPU Buying Guide for Local AI